China Factory for Smart Water Meter - SC7 Serials Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Features
Above 10 years shelf life.
Installation at any angel, no influence for measurement accuracy.
Ultrasonic signal quality detection.
Photosensitive button, IP 68 design, longtime under water working.
Support optical, RS485 and wired & wireless M-bus communication interfaces.
Complies to MODBUS RTU and EN 13757 communication protocol.
Compile to drinkable water standard requirement.
Key Technology Point
Display Description
Pressure Loss Curve
Technical Parameter
Nominal Diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
|||||
Nominal Diameter Q3 (m3/h) |
2.5 |
4 |
6.3 |
10 |
16 |
|||||
Min flow rate Q1 (L/h) |
10 |
6.25 |
16 |
10 |
25.2 |
15.8 |
40 |
25 |
64 |
40 |
Pressure loss class △P |
63 |
63 |
40 |
40 |
40 |
|||||
Flow arte maximum reading (m3) |
99999.99999 |
|||||||||
Accuracy class |
Class 2 |
|||||||||
Maximum working pressure |
1.6MPa |
|||||||||
Temperature class |
T30/T50/T70 optional |
|||||||||
IP grade |
IP68 |
|||||||||
Power supply |
3.6V lithium battery |
|||||||||
Battery lifetime |
≥ 10 years |
|||||||||
Environment & mechanical condition |
Class C |
|||||||||
Electromagnetic compatibility |
E1 |
|||||||||
Heat (cooling) carrier |
conduit is full charged with water |
|||||||||
Installation mode |
at any angle |
Dimension
Nominal diameter DN (mm) |
15 |
20 |
25 |
32 |
40 |
L (mm) |
165 |
190 |
260 |
260 |
300 |
L1 (mm) |
97 |
97 |
97 |
97 |
97 |
L2 (mm) |
255 |
||||
H (mm) |
91 |
||||
H1 (mm) |
31 |
||||
W (mm) |
90 |
||||
Meter screw A (inch) |
G 3/4B |
G 1B |
G1 1/4B |
G1 1/2B |
G 2B |
Coupling screw B (inch) |
R1/2 |
R3/4 |
R1 |
R1 1/4 |
R1 1/2 |
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of China Factory for Smart Water Meter - SC7 Serials Water Meter – Lanry, The product will supply to all over the world, such as: Uzbekistan, New Zealand, Cairo, Our company insists on the principle of "Quality First, Sustainable Development", and takes "Honest Business, Mutual Benefits" as our developable goal. All members sincerely thank all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.
By Maria from Malaysia - 2017.10.27 12:12
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Ina from Brunei - 2017.03.28 16:34