Quality Inspection for Water Meter Flow Rate - SC7 Serials Ultrasonic Water Meter – Lanry Detail:
Features
Key Technology Point
Display Description
Pressure Loss Curve
Dimension
Product Features
◆ Low starting flow rate, minimum flow rate 1/3 of traditional water meter.
◆ Water temperature detection, low temperature alarm.
◆ No moving part, no wear, long term stable operation.
◆ Above 10 years shelf life.
◆ Installation at any angel, no influence for measurement accuracy.
◆ Ultrasonic signal quality detection.
◆ Photosensitive button, IP 68 design, longtime under water working.
◆ Support optical, RS485 and wired & wireless M-bus communication interfaces.
◆ Complies to MODBUS RTU and EN 13757 communication protocol.
◆ Compile to drinkable water standard requirement.
Key Technology Point
Display Description (Residential)
Pressure Loss Curve
Ultrasonic Water Meter
| Nominal Diameter DN (mm) | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 |
| Nominal Diameter Q3 (m3/h) | 25 | 40 | 63 | 100 | 250 | 400 | 630 | 1000 |
| Min flow rate Q1 (L/h) | 50 | 80 | 126 | 200 | 500 | 800 | 1260 | 2000 |
| Pressure loss class △P | 25 | |||||||
| Flow arte maximum reading (m3) | 99999.99999 | |||||||
| Accuracy class | Class 2 | |||||||
| Maximum working pressure | 1.6MPa | |||||||
| Temperature class | T30/T50/T70 optional | |||||||
| IP grade | IP68 | |||||||
| Power supply | 3.6V lithium battery | |||||||
| Battery lifetime | ≥ 10 years | |||||||
| Environment & mechanical condition | Class C | |||||||
| Electromagnetic compatibility | E1 | |||||||
| Heat (cooling) carrier | conduit is full charged with water | |||||||
| Installation mode | at any angle | |||||||
Dimension
| Nominal diameterDN (mm) | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 |
| L (mm) | 200 | 200 | 225 | 250 | 300 | 350 | 450 | 500 |
| H (mm) | 220 | 227 | 257 | 266 | 310 | 400 | 452 | 496 |
| H1 (mm) | 65 | 70 | 90 | 102.5 | 134 | 165 | 197 | 222 |
| W (mm) | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 |
| B (mm) | 130 | 140 | 180 | 200 | 268 | 330 | 394 | 445 |
| n x φD1 | 4 x φ18 | 4 x φ18 | 8 x φ18 | 8 x φ18 | 8 x φ22 | 12 x φ22 | 12 x φ26 | 12 x φ26 |
Product detail pictures:
Related Product Guide:
Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Quality Inspection for Water Meter Flow Rate - SC7 Serials Ultrasonic Water Meter – Lanry, The product will supply to all over the world, such as: Lisbon, Armenia, Malawi, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Tom from Tanzania - 2017.09.22 11:32
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Joa from Brasilia - 2017.10.27 12:12
Send your message to us:
Write your message here and send it to us