Super Lowest Price Non Contact Ultrasonic Flow Meter - clamp on doppler flow meter ultrasonic for raw water – Lanry Detail:
Description
Features
Specificaitons
Configuration Code
DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.
The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays, OCT outputs.
Features
A wide range of flow measurement, high flow rate can reach 12m/s
High-temperature transducer is suitable to liquids of -35℃ ~ 200℃
Do not need to shut down the pipe flow when installing the transducers
User-friendly configuration
4-20mA, Relay and OCT outputs
Accuracy: 2.0% Calibrated span
Specificaitons
Transmitter:
Measurement principle | Doppler ultrasonic |
Resolution | 0.25mm/s |
Repeatability | 0.2% of reading |
Accuracy | 0.5% — 2.0% F.S. |
Response time | 2-60s for optional |
Flow Velocity Range | 0.05- 12 m/s |
Liquid Types Supported | Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron. |
Power Supply | AC: 85-265V DC: 24V/500mA |
Enclosure type | Wall-mounted |
Degree of protection | IP66 according to EN60529 |
Operating temperature | -20℃ to +60℃ |
Housing material | Fiberglass |
Measurement Channels | 1 |
Display | 2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable) |
Units | User Configured (English and Metric) |
Rate | Rate and Velocity Display |
Totalized | gallons, ft³, barrels, lbs, liters, m³,kg |
Communication | 4-20mA,Relay and OCT output |
keypad | 4pcs buttons |
Size | 244(h)*196(w)*114(d)mm |
Weight | 2.4kg |
Transducer:
Transducers Type |
Clamp-on |
Degree of protection |
IP65. IP67 or IP68 according to EN60529 |
Suited Liquid Temperature |
Std. Temp.: -35℃~85℃ for short periods up to 120℃ |
High Temp.: -35℃~200℃ for short periods up to 250℃ |
|
Pipe diameter range |
40-4000 mm |
Transducer Size |
60(h)*34(w)*32(d)mm |
Material of transducer |
Aluminum for standard temp.sensor and peek for high temp.sensor |
Cable Length |
Std: 10m |
Configuration Code
DF6100-EC | Wall-mounted Doppler Clamp-on Ultrasonic Flowmeter | |||||||||||||||||
Power supply | ||||||||||||||||||
A | 110VAC | |||||||||||||||||
B | 220VAC | |||||||||||||||||
D | 24VDC | |||||||||||||||||
S | 65W Solar supply (including solar board) | |||||||||||||||||
Output Selection 1 | ||||||||||||||||||
N | N/A | |||||||||||||||||
1 | 4-20mA | |||||||||||||||||
2 | Relay | |||||||||||||||||
3 | OCT | |||||||||||||||||
Output Selection 2 | ||||||||||||||||||
Same as above | ||||||||||||||||||
Sersor Type | ||||||||||||||||||
S | Standard Clamp-on transducer (DN40-4000) | |||||||||||||||||
Transducer Temperature | ||||||||||||||||||
S | -35~85℃ (for short periods up to 120℃) | |||||||||||||||||
H | -35~200℃ | |||||||||||||||||
Pipeline Diameter | ||||||||||||||||||
DNX | e.g.DN40—40mm, DN4000—4000mm | |||||||||||||||||
Cable length | ||||||||||||||||||
10m | 10m (standard 10m) | |||||||||||||||||
Xm | Common cable Max 300m(standard 10m) | |||||||||||||||||
XmH | High temp. cable Max 300m | |||||||||||||||||
DF6100-EC | — | B | — | 1 | — | N/LDC | — | D | — | S | — | DN100 | — | 10m | (example configuration) |
Product detail pictures:

Related Product Guide:
We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Super Lowest Price Non Contact Ultrasonic Flow Meter - clamp on doppler flow meter ultrasonic for raw water – Lanry, The product will supply to all over the world, such as: Austria, Berlin, Ireland, With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost items and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.

We are old friends, the company's product quality has been always very good and this time the price is also very cheap.

-
OEM/ODM China Chemical Flow Meters Liquid - Tr...
-
professional factory for River Flow Measurement...
-
OEM/ODM China Chemical Flow Meters Liquid - Tr...
-
OEM/ODM Factory Flow Meter For Stream - Handhe...
-
Best quality Flow Meters For Wastewater - SC7 ...
-
Factory wholesale Ultrasonic Water Flow Sensor ...