-
V-Mode and W-Mode Installation of transit time portable handheld flowmeter ultrasonic
1. For TF1100 clamp on flow transducers, place a single bead of couplant, approximately 0.05inch [1.2mm] thick, on the flat face of the transducer. Generally, silicone-based grease is used as an acoustic couplant, but any grease-like substance that is rated not to “flow” at the temperature that t...Read more -
TRANSDUCER SPACING of transit time clamp on ultrasound flowmeter
Transit time ultrasonic clamp-on transducers are clamped on the outside of a closed pipe at a specific distance from each other. The transducers can be mounted in V-mode where the sound transverses the pipe two times, W-mode where the sound transverses the pipe four times, or in Z-mode where the ...Read more -
MOUNTING LOCATION of TF1100-EP portable flow meter clamp on
The first step in the installation process is the selection of an optimum location for the flow measurement to be made. For this to be done effectively, a basic knowledge of the piping system and its plumbing is required. An optimum location is defined as: A piping system that is completely full...Read more -
Introduction of TF1100 serial and DF6100 serial ultrasonic flow meter
Lanry TF1100 serial Transit-time ultrasonic flow meter can measure the fluid velocity within a closed conduit. It includes TF1100-EC clamp on fixed type flowmeter,TF1100-EI insertion fixed flowmeter,TF1100-CH handheld flowmeter and TF1100-EP portable ultrasonic flow meter. The sensors are a non-...Read more -
What are our advantages of open channel flow meter compared with other suppliers ?
For open channel ultrasonic liquid flowmeter 1. Our level range of this meter is 10m,the level rage from other suppliers is 5m 2. Our flow velocity range of this meter is 12m/s,the flow rate from others suppliers is 5m/s 3. Our flow direction of this meter is bidirectional (back forward flow ...Read more -
Open Channel Ultrasonic Flow Meters ( area velocity )
Lanry DOF6000 serial Open channel ultrasonic flow measurement is a liquid flow and level meter in water applications. It can measure volumetric flow rates flow,level,temperature and conductivity for fluids. Some typical applications include wastewater treatment processing effluent flows, wate...Read more -
Transit time Ultrasonic flowmeter from Lanry
The Lanry brand TF1100 serial transit time ultrasonic technology liquid flow meter is high accuracy,excellent flow measurement value,cost-efficient and no maintenance. It is ideal for all kinds of clean liquids like water.This type meter is designed specifically for water and wastewater applicati...Read more -
Some advantages of Lanry brand ultrasonic flowmeter
1, From the outside, you can see our products’ quality. Most of the product parts are imported from USA or Europe. You’ll see Lemo connection(TF1100-EH &EP) and Pelican case(TF1100-EH&CH&EP), Allied enclosure(TF1100-EC). The sensitiveness of our product is better. The act...Read more -
What types water meter we can supply ?
The different type of water meter as below. 1. Ultrasonic water meter (Lanry only focus on ultrasonic technology for water meters ) 2. PD (Positive Displacement) Meter 3. Velocity flow meter 4. Electromagnetic water meter At present,we can supply below models for ultrasound water meter,also named...Read more -
What is the NB-IoT Ultrasonic Water Meter ?
Wireless NB-IoT technology Ultrasonic water meter NB-IOT inline water meter also named smart water meter which adopts an electronic ultrasonic water meter on the basic of ultrasonic measurement principle,and its accuracy is even higher.It has an super high range ratio and low launch,as well as n...Read more -
Product range from Lanry
Lanry’product range is wide,the details as below. Flowmeter TF1100 Transit-time ultrasonic flowmeter flow, velocity,heat Ultrasonic Transit-time full pipe Clean or a little dirty liquid TF1100-EC clamp-on TF1100-EI insertion TF1100-CH handheld TF1100-EP port...Read more -
Water treatment application for DOF6000 serial area velocity flow meter
Application Background Water quality measurements are performed for water in streams, rivers, lakes and in groundwater systems. There are different parameters that can be measured and used as indicators of water quality, for example electro conductivity (EC), acidity or alkalinity of a solution (...Read more