1. From the outside, you can see our products' quality. Most of our meter accessories and electronic components are imported from Europe and USA.
2. Our meter is with 3.5" color LCD display.
3. Our sensor material is Aluminium+peek, their sensor material is plastic.
4. Our standard meter measure temperature as -35-200°C, and it can really bear this temp, their sensor will damage if temp more than 120°C.
5. Our meter is better for low flow rate measure, we cut at 0.01 m/s or not cut as zero cutting, some other meters cut at 0.03 m/s or more. Our meter zero point is better.
6. Our meter is also better for high flow rate measure, some other meters will display no signal or messy code when the flow rate is more than 4 m/s.
7. We calibrate every meter before shipment, the standard calibrate as 5 points, and 3 times for every point.so total 15 points. As I know, no calibrate for many China suppliers
8. We use the same system for TF1100-EC (single channel flowmeter, accuracy 1%R) and TF1100-DC( two channels flowmeter, accuracy 0.5%R), and it is support any third party laboratory test.
9. Our meter is with temperature compensation function.
10. Datalogger with SD card, the data can be read and analyse by excel directly.
11. Better linearity, zero and stability.
12. We have Doppler and partially filled open channel flowmeter.
Post time: Jun-05-2025