Ultrasonic Flow Meters

20+ Years Manufacturing Experience

Non-invasive wall mounting Ultrasonic flowmeters

Short Description:

TF1100-EC Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.

This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.


TF1100-EC Wall-mounted Transit Time Ultrasonic Flow meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.

This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

Features

feature-ico01

Non-invasive transducers are easy to install, cost effective, and require no pipe cutting or processing interrupt. 

feature-ico01

Wide liquid temperature range: -35℃~200℃.

feature-ico01

Data logger function. 

feature-ico01

Thermal energy measurement capability can be optional.

feature-ico01

For commonly used pipe materials and diameters from 20mm to over 6000m.

feature-ico01

Wide bi-directional flow range of 0.01 m/s to 12 m/s.

Specificaitons

Transmitter:

Measurement principle Ultrasonic transit-time difference correlation principle
Flow velocity range 0.01 to 12 m/s, bi-directional
Resolution 0.25mm/s
Repeatability 0.2% of reading
Accuracy ±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Response time 0.5s
Sensitivity 0.003m/s
Damping of displayed value 0-99s(selectable by user)
Liquid Types Supported both clean and somewhat dirty liquids with turbidity <10000 ppm
Power Supply AC: 85-265V   DC: 24V/500mA
Enclosure type Wall-mounted
Degree of protection IP66 according to EN60529
Operating temperature -20℃ to +60℃
Housing material Fiberglass
Display 4 line×16 English letters LCD graphic display, backlit
Units User Configured (English and Metric)
Rate Rate and Velocity Display
Totalized gallons, ft³, barrels, lbs, liters, m³,kg
Thermal energy unit GJ,KWh can be optional
Communication 4~20mA(accuracy 0.1%),OCT, Relay, RS232, RS485 (Modbus),data logger
Security Keypad lockout, system lockout
Size 244*196*114mm
Weight 2.4kg

Transducer:

Degree of protection IP65 according to EN60529.(IP67 or IP68 Upon request)
Suited Liquid Temperature Std. Temp.: -35℃~85℃ for short periods up to 120℃
High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range 20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L
Transducer Size Type S 48(h)*28(w)*28(d)mm
Type M 60(h)*34(w)*32(d)mm
Type L  80(h)*40(w)*42(d)mm  
Material of transducer Aluminum (standard temperature), and peek (high temperature)
Cable Length Std:10m
Temperature Sensor Pt1000 Clamp-on Accuracy: ±0.1%

Configuration Code

TF1100-EC   Wall-mounted Transit-time Clamp-on Ultrasonic Flowmeter          
    Power supply                                
    A   85-265VAC                                 
    D   24VDC                                    
    S   65W Solar supply              
        Output Selection 1                            
        N   N/A                                  
        1   4-20mA (accuracy 0.1%)                        
        2   OCT                                 
        3   Relay Output (Totalizer or Alarm)                
        4   RS232 Output                               
        5   RS485 Output (ModBus-RTU Protocol)            
        6   Data storage fuction                          
        7   GPRS                                 
            Output Selection 2                        
                Same as above                        
                Output Selection 3                      
                    Transducer Type                  
                    S   DN20-50                                 
                    M   DN40-1000                
                    L   DN1000-6000                
                        Transducer Rail                
                        N   None                
                        RS   DN20-50             
                        RM   DN40-600  (For larger pipe size, pls contact us.)
                            Transducer Temperature      
                            S   -3585 (for short periods up to 120)
                            H   -35200 (Only for S.M sensor.)  
                                Temperature Input Sensor    
                                N   None            
                                T   Clamp-on PT1000
                                    Pipeline Diameter     
                                    DNX   e.g.DN20—20mm, DN6000—6000mm
                                        Cable length    
                                        10m   10m (standard 10m) 
                                        Xm   Common cable Max 300m(standard 10m) 
                                        XmH High temp. cable Max 300m
                                                 
TF1100-EC A 1 2 3 /LTC— M N S N DN100 10m   (example configuration)

Applications

Service and maintenance
Replacement of defective devices
Support of commissioning process and installation
Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves

Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Petrochemical industry
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Refrigeration and air conditioning systems
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Metallurgy and mining applications
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us: