-
Portable Doppler Ultrasonic Flowmeter DF6100-EP
Series DF6100-EP Doppler Portable Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.
The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, OCT outputs.
-
DOF6000-W Series Wall Mounted Area Velocity Flowmeter
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor.
The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated.
The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications. -
Partially Filled Pipe & Open Channel Flowmeter DOF6000
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 sensor.
The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes.
When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated.
The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications.
Ultrasonic Doppler Principle in Quadrature Sampling Mode is utilised to measure water velocity. The 6537 Instrument transmits ultrasonic energy through its epoxy casing into the water. Suspended sediment particles, or small gas bubbles in the water reflect some of the transmitted ultrasonic energy back to the 6537 Instrument’s ultrasonic receiver instrument that processes this received signal and calculates the water velocity.
-
DOF6000-P series Portable Area Velocity Flowmeter
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor.
The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated.
The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications.
-
WM9100-ED Residential Ultrasonic Water Meter
Residential ultrasonic water meter is used for measuring and display water flow.
Stainless steel 316l is optional, meet the measurement of direct drinking water
Built-in wireless nb-iot, Wired M-bus, RS485; Wireless LoRaWAN
Nominal Diameter: DN15~DN25
-
WM9100-EV Prepaid Ultrasonic Water Meter
WM9100-EV Residential Prepaid Ultrasonic Water Meter
Stainless steel 316l is optional
Integrated meter and valve, fully enclosed structure, anti-vandalism
Low consumption design, battery can continuously work for 10 years
Communication: Wired M-bus, RS485; Wireless LoRaWAN
Nominal Diameter: DN15~DN25
-
WM9100 Series Ultrasonic Water Meter DN32-DN40
WM9100Series Ultrasonic Water Meter is used for measuring and display water flow.
Nominal Diameter: DN32, DN40
-
WM9100 Series Bulk Ultrasonic Water Meter DN50-DN300
WM9100 Series Ultrasonic Water Flow Meter is used for measuring, storage and display water flow.
Pipe diameter: DN50-DN300
-
WM9100 Series Ultrasonic Water Meter DN350-DN600
WM9100 Series Bulk Water Meter Ultrasonic Water Meter is used for measuring, storage and display water flow.
Nominal Diameter: DN350-DN600
-
MAG-11 Electromagnetic Flow Meter Thread Connection
Mag-11 Series Electromagnetic Flowmeter is based on the law of Farad Electromagnetic Induction, which is used to measure the conductance greater than 5 μS / cm volume of conductive liquids flow, such as such as water,sewage,mud,paper pulp,beverage,chemical,viscous liquid and suspension. Thread-type sensor breaks through the conventional design of electromagnetic flowmeter, it makes up the fatal flaw of some flow meters in the field of small flow measurement, it has the advantage of light and handy appearance,convenient installation,widely measuring range and hard to clogged, etc.
-
EW6800 Series Electromagnetic Water Meter
Lanry EW6800 Series Electromagnetic Water Meter is designed for the water industry, it completely solves the problem of easily clogging and no ability to measure small water flow with tranditional mechanical water meter for achieving the accurate measurement of water flow. Due to it is operated by built-in 3.6V lithium battery, it is suitable for remote areas.
-
Sanitary Electromagnetic Flow Meter Clamped MAG-11
Mag-11 series clamp type electromagnetic flowmeter is designed for sanitary application. The clamped type sensor is made of stainless steel, and the lining material is FEP / PFA, which can meet the hygeian requirements of the lining, widely used in food, beverage, medicine and other industries. The process often needs regular cleaning and disinfection, in order to disassemble conveniently, generally the connection of clamp joint and the test pipe is used.
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991