Wall-mounted ultrasonic flowmeter is a common flow meter used to measure the flow of various liquid media. During use, in order to ensure its normal operation, necessary maintenance and maintenance are required.
1. The flowmeter needs to be fully cleaned before use. Because during use, instrument components may be blocked or damaged, affecting the accuracy and precision of the flow meter. Therefore, the surface and plug of the instrument should be cleaned before use to ensure that the connection port is clean and dust-free and is normally connected to avoid poor connection problems. In the measurement pipeline, it is also necessary to pay attention to the purity and sub-micron level cleaning in the channel, and the body interface needs to pay attention to the five guarantees.
2. It is necessary to regularly check the accuracy of the meter’s readings and other display functions. The inspection time can be autonomous depending on the frequency of use, usually once a month or once every two months. During the inspection process, the flowmeter needs to be placed in a standard flow environment for stable calibration work, and it is necessary to avoid interference factors such as water, gas and temperature difference on the surface of the flowmeter, which may cause the reading deviation of the flowmeter. For parts with more severe wear and corrosion, they must be replaced to ensure high precision and accurate measurement purposes. Equipment and sensitive elements need to be protected.
3. After the use of the flowmeter, it is better to clean the environment each time before and after use. It is necessary to pay attention to waterproof and dustproof, to avoid strong falls and collisions with flowmeter equipment, so as not to damage pipelines and flowmeter equipment.
4. The use of the flow timing, should avoid its excessive extrusion and distortion. When the liquid in the pipeline flows, care should be taken not to increase or reduce the pressure of the flowmeter, and to keep it balanced to avoid excessive extrusion and distortion of the flowmeter equipment.
All in all, the wall-mounted ultrasonic flowmeter is an important equipment for accurate flow measurement, and it is necessary to protect the equipment and sensitive elements. At the same time, in use, it is also necessary to follow some necessary maintenance methods, including cleaning equipment, checking flowmeter readings, strict waterproof and so on. These methods can ensure the precision and accuracy of the flow meter to improve production efficiency and operational stability, and provide scientific and technological support for industrial production to rationalize and high efficiency.
Post time: Jun-09-2023