-
Why does the flowmeter reading increase when the control valve is partially closed or flow is red...
This is usually because the sensor is installed too close to the downstream of the control valve. When the valve is partially closed, the flowmeter actually measures the increased flow velocity caused by the reduced diameter of the valve. The solution is to move the sensor away from the control v...Read more -
Why does the flowmeter show low or no flow velocity when the sensor is functioning normally?
Possible causes and solutions include: Paint or rust on the pipe exterior not fully removed: Re-clean the pipe surface before reinstalling the sensor. Uneven pipe surface or installation over a weld seam: Polish the pipe surface or install the sensor away from weld seams. Poor pipe roundness, ro...Read more -
How to address inaccurate readings or large errors of a clamp-on ultrasonic flowmeter?
There are multiple potential causes: If sensors are mounted on the top or bottom of a horizontal pipe (leading to signal interference from sediments), reposition them to the sides of the pipe. If installed on a downward-flowing pipe with insufficient fluid filling, relocate the meter to a fully ...Read more -
Why does the flowmeter display unstable and fluctuating readings, and how to resolve this issue?
This may be caused by excessive vibration of the pipe where the ultrasonic flow sensor is installed, or the presence of flow-altering devices (e.g., the flowmeter is installed downstream of control valves, pumps, or orifices). The solution is to reinstall the flow sensor away from vibration sourc...Read more -
How to ensure the measurement accuracy of a clamp-on ultrasonic flowmeter?
First, select an appropriate model based on measurement requirements (e.g., accuracy, pipe diameter, fluid type). Install the device strictly in accordance with the straight pipe section requirements to ensure the correct installation position. Use special coupling agent to ensure tight contact b...Read more -
What are the requirements for the installation location of a clamp-on ultrasonic flowmeter?
The installation location must have sufficiently long straight pipe sections upstream and downstream. Generally, the length of the upstream straight pipe section should be greater than 10 times the pipe diameter, and the downstream section greater than 5 times the pipe diameter. This ensures stab...Read more -
The Asian Market of Open-Channel Flow Meters: Growth, Drivers, and Competitive Landscape
1. Current Market Overview The open - channel flow meter market in Asia has been experiencing robust growth in recent years. As of 2025, it holds a significant share in the global market, and its importance is only set to increase. The market size in Asia is estimated to...Read more -
Factors Affecting the Measurement Accuracy of Small-Bore Ultrasonic Flowmeters
Small-bore ultrasonic flowmeters (typically for pipes 6–50 mm in diameter) rely on precise sound wave transmission and signal processing to calculate flow rates, but their accuracy is easily influenced by external conditions, fluid properties, and installation practices....Read more -
Advantages of Small-Bore Ultrasonic Flowmeters: Precision and Versatility for Compact Fluid Systems
Small-bore ultrasonic flowmeters—designed for pipes typically ranging from 6 mm to 50 mm in diameter—have emerged as a game-changing solution for flow measurement in compact, high-precision applications. Unlike traditional mechanical flowmeters (e.g., turbine or p...Read more -
The Market Landscape of Electromagnetic Flow Meters in Europe
The Market Landscape of Electromagnetic Flow Meters in Europe 1. Current Market Size and Growth Trends The electromagnetic flow meter market in Europe has been on a growth trajectory in recent years. In 2024, the global electromagnetic flow meter market was valued at USD...Read more -
Requirements of Doppler Flowmeters for Measured Liquids: Key Considerations for Accuracy and Reli...
Doppler flowmeters, leveraging the Doppler effect to calculate fluid velocity by detecting sound wave reflections from moving particles, have become a go-to solution for measuring non-conductive, particle-laden, or turbulent liquids in industries like wastewater treatmen...Read more -
Electromagnetic Flowmeters: Precision and Versatility in Modern Flow Measurement
Electromagnetic flowmeters, often called "magmeters," have revolutionized fluid measurement across industries by leveraging Faraday’s Law of electromagnetic induction to provide accurate, non-intrusive flow data. Unlike traditional their reliance on complex technology, t...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991