-
Can It Support Remote Meter Reading?
Yes, ultrasonic water meters can support remote meter reading (AMR/AMI systems). They allow users to: • Monitor water consumption in real time • Collect data automatically without manual reading • Improve efficiency and reduce labor costs • Enable smart water management and leakage analysis S...Read more -
What Media Can Ultrasonic Water Meters Measure?
Ultrasonic water meters are designed to measure liquid flow using ultrasonic transit-time technology. They are suitable for a wide range of clean and moderately contaminated liquids. ✅ Suitable Media 1. Clean Water • Drinking water • Tap water • Purified water • Deionized (DI) water 2. Indu...Read more -
Difference Between Ultrasonic Water Meters and Mechanical Water Meters
Ultrasonic water meters and traditional mechanical water meters differ significantly in their measurement principles, performance, and applications. 1. Measurement Principle • Ultrasonic Water Meter Uses the transit-time ultrasonic technology to measure the velocity of water flow. It calculates ...Read more -
Can Radar Level Transmitters Measure Solids Like Powder or Grain?
Yes, radar level transmitters are widely used to measure bulk solids such as powder, grain, cement, coal, and pellets. However, their performance depends on several material and installation factors. 1. How Radar Measures Solid Materials Radar level transmitters emit microwave signals toward the ...Read more -
Difference Between Guided Wave Radar and Non-Contact Radar Level Transmitters
Radar level measurement technology is mainly divided into two types: Guided Wave Radar and Non-Contact Radar. While both use microwave signals to measure level, their working principles and applications differ significantly. 1. Working Principle Guided Wave Radar: GWR transmits microwave pulses a...Read more -
Introduction to 4-20 mA Output
1. What is 4-20 mA output 4-20 mA is a standard analog current signal widely used in industrial instruments, such as level meters, flow meters, pressure transmitters, etc. 4 mA represents the 0% lower range value 20 mA represents the 100% upper range value 2. Advantages of 4-20 mA Strong anti-int...Read more -
Introduction to Radar Flow Meter
1. Working Principle Radar flow meter is a non-contact flow measurement device based on FMCW (Frequency Modulated Continuous Wave) or pulse radar technology. It transmits high-frequency radar waves towards the liquid surface, receives the reflected echo, and calculates the liquid level, flow velo...Read more -
Introduction to Modbus RTU and Modbus TCP
Modbus RTU Modbus RTU is a serial communication protocol based on RS‑485 hardware interface. It uses binary coding for high efficiency. Typical baud rates: 9600, 19200, 38400, 57600, 115200 bps. Master‑slave architecture: one master, multiple slaves. Communication distance: up to 1200 meters (wit...Read more -
Can ultrasonic level meters measure solids ?
Ultrasonic level meters can measure solid materials, but they have significant limitations compared to measuring liquids. Below is a detailed explanation for technical support reference: 1. Working Principle Ultrasonic level transmitters work by emitting ultrasonic pulses and calculating the dist...Read more -
Can ultrasonic flow meters be installed outdoors?
Yes, our ultrasonic flow meters can be installed outdoors and are designed for outdoor applications. Here is the detailed explanation: Protection gradeThe transmitter protection grade is IP65 as standard, and the sensor can reach IP67/IP68, which is dustproof, waterproof, and spray-proof. It can ...Read more -
Selection Guide for Thermal Mass Flow Meter
When selecting a thermal mass flow meter, the following key parameters should be confirmed: Measured mediumIt is mainly used for clean, dry gases, such as compressed air, nitrogen, oxygen, natural gas, biogas, flue gas, etc.It cannot measure liquids or wet gas with liquid droplets. Flow rate rang...Read more -
Applications of Thermal Mass Flow Meter
Thermal mass flow meters are mainly used for measuring clean, dry gases, especially suitable for low flow rate, wide turndown ratio and energy-saving monitoring scenarios. Typical Applications Compressed Air MeasurementFactory air monitoring, compressor energy saving, pipeline air distribution. I...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991