Why choose Lanry DOF6000 area velocity doppler flow meter ?

The reasons as below.

1. Bidirectional measurement. Negative water flow will affect the meter’s measurement values in the case of water flow backward or intrusion.
2. Liquid depth measurement by ultrasonic depth sensor or pressure depth sensor. You can switch them as your requirements.
3. For whole DOF6000 meter, it is built-in pressure compensation function to ensure the better work of the meter for water depth. But for only QSD6537 sensor without this function, we also can provide barometric pressure module with you.
4. Integral accelerometer sensor to measure the inclination of the meter and check whether the sensor is installed in the correct position.
5. Suitable for low flow rate measurement, you can choose the flow velocity range according to the flow velocity status on actual site.
6. Conductivity measurement, it’s an important index to judge water quality.
7. QSD6537 sensor is epoxy-sealed body, and its protection class is IP68.
8. The size of the sensor is very small, and it can measure 200mm to 6000mm diameter pipes.

Lanry Instruments, A Professional Manufacturer Of Flow Meters