-
Whether galvanized pipe can use external ultrasonic flowmeter?
The thickness of galvanizing is different from the method of galvanizing (electroplating and hot galvanizing are the most common, as well as mechanical galvanizing and cold galvanizing), resulting in different thickness. Generally, if the pipe is galvanized externally, it only needs to polish off...Read more -
Does the conductivity measurement QSD6537 flow sensor can detect the composition of the medium ?
The QSD6537 integrates conductivity, which is a numerical representation of a solution’s ability to conduct current. Electrical conductivity is an important index to measure water quality. The change of electrical conductivity can provide valuable information about pollutants. Chemical/p...Read more -
When QSD6537 open channel flow sensor is installed,what should we pay attention to ?
1. The caculator should be installed in a place where there is little or no vibration, no corrosive objects, and the ambient temperature is -20℃-60℃. Direct sunlight and rain water should be avoided. 2. Cable connector is used for sensor wiring, power cable and output cable wiring. If not, plu...Read more -
What are the advantages of dual channel ultrasonic flow meter ?
1. Bidirectional flow measurement of fluids,such as water,oil,fuel,sea water,chilled water,beer and so on; 2. Excellent zero-point stability 3. Dual channel non-invasive transducers. 4. 0.5%R high accuracy. 5. Easy to install, cost effective, and require no pipe cutting. 6. Wide liquid temperatur...Read more -
What is the working principle for QSD6537 ?
DOF6000 serial with QSD6537 sensors area velocity open channel flow meter 1. Flow : area velocity doppler flow meter; 2. Velocity: Ultrasonic Doppler technology; 3. Level: Ultrasonic level sensor & pressure level sensor; 4. Area: with up to 20 coordinate points describing the river’s shape of...Read more -
What to pay attention to when installing DOF6000 open channel flowmeter ?
1. The caculator should be installed in a place where there is little or no vibration, no corrosive objects, and the ambient temperature is -20℃-60℃. At the same time,sun shooting and rain soaking should be avoided. 2. Cable hole is used for sensor wiring, power cable and output cable wiring. If...Read more -
If signal strength value Q displayed in M90 is less than 60 ,following methods are recommended to better off:
1) Relocate a better location. 2) Try to polish the outer surface of the pipe ,and use enough coupling compound to increase the signal strength. 3) Adjust the transducer positioning vertically and horizontally; make sure the transducers spacing is the same as M25 value. 4) when the pipe materi...Read more -
What are the advantages of Ultrasonic Flow Meters?
For clamp on ultrasonic liquid flow meter, 1. Clamp-on type,no contact flow transducers as well as no pipe cutting& process interruption 2. Bidirectionl flow measurement 3. No moving parts and no maintenance for ultrasonic water flow meter 4. Flow and Heat/energy measurement 5. Optional for c...Read more -
What is Ultrasonic flowmeter ?
Utrasonic flow meter is a fluid flow measurement instruments by ultrasound technology to work out the volume flow. For this meter,It has a highlighted advantage that it does not directly contact the fluids. Additionally,there are two ways by Transit time and Doppler shfit.Transit time Ultrasonic ...Read more -
Some tips for SC7 inline ultrasonic water meter
1. SC7 serial water meter is a precision measuring instrument ,strict test before leaving factory,please operate by professional personnel. 2. If the product does not operate normally or in need of repair, please contact our company or through our authorized dealers; 3. This product is a prec...Read more -
How does an Ultrawater ultrasonic water meter work ?
High accuracy R500 Class 1 304 Stainless Steel Ultrasonic water meter A transit time ultrasonic flow meter uses ultrasonic transducers that can both send and receive signal. The ultrasonic signal is transmitted between the transducers through the fluid that pass through the flow meter. The tr...Read more -
What is the Installation Steps for V,W，Z and N Transducer Mounting Method ?
For our TF1100-CH handheld flow meter,the installation as followed. When using V or W method to install transducers, install the two transducers on the same side of pipeline. 1. Connect the chains and spring. 2. Lay on enough couplant on the transducer. 3. Connect the transducers cable. 4. E...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991