-
TF1100-EC Wall Mounted Ultrasonic Flow Meter
TF1100-EC Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.
This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.
-
UOL Serials Open Channel flowmeter
UOL serials is non-contact ultrasonic open channel flow meter, with low blind area, high sensitivity, high stability. It consists of ultrasonic probe and the host, mainly used for measuring water conservancy irrigation, sewage plants, enterprises and institutions of the flow rate of the sewage outfalls, urban sewage and chemical enterprise part of the flow measurement.
-
UOC Serial Open channel flow meter
The series is a remote version ultrasonic open channel flow meter (UOC). It consists of two elements, a wall mounted host, which has a display and an integral keypad for programming, and a probe, which must be mounted directly above the surface to be monitored. Both of the host and the probe are plastic leak-proof structure.
It can be widely applied to the environmental protection, water treatment, irrigation, chemical, and other industries. -
LMU Serials Compact Type Ultrasonic Level Meter
The LMU is compact ultrasonic level meter for continuous non-contact level measurement in liquids and solids. It consists of probe and electronic units, both of which are leak-proof structure. This series can be widely applied to the metallurgical, chemical, electricity and oil industries.
-
LMB Series Remote version ultrasonic level meter
LMB Series Remote version ultrasonic level meter is that the level meter’s electronic unit (set parameters, display, the signal output) is separate from the ultrasonic probe, connected by cable each other, the ultrasonic probe is installed in the upper container, the electronic unit (i.e., host) can choose the installation location flexibly, in order to facilitate observation, operation.
LMB series Remote ultrasonic level meter, the use of imported host shell, compact and easy to install, commonly functional, economical and practical is preferred.
-
LMC Series Remote version ultrasonic level meter
LMC series remote version ultrasonic level meter is fully functional, with optional multiple relays (6 pcs at most) and communication methods, multi-point measurement, which can also be customized according to customer demand the desired function. Can be equipped with easy to operate remote controller.
-
LMD Series Remote version ultrasonic level meter Level-difference Meter
LMD series level-difference meter is equipped with one host and two probes, the probes placed in the upper before and after every evil gate, measuring the levels and the host calculates the difference level value. Mainly used in a liquid level difference before and after the water conservancy facilities, such as sewage treatment plant’s sedimentation tank, DAMS, etc.
-
LVT & LVR Ultrasonic Level Transmitter Without Display
Lever transmitter is devided into the LVT series two-wire type and the LVR series digital type.
-
LZR Serial Ultrasonic Level Meter Modbus
LZR series 2-wire Modbus type ultrasonic level sensor is a general purpose product that replaces float, conductance and pressure sensors that fail due to contact with dirty, sticky and scaling liquids in small, medium and large capacity tanks. The sensor can be powered by a 24VDC external power source and power supply waterproof cable provided. The sensor provides continuous level measurement up to 3m with a RS485 Modbus Output . Users can set parameters and read the data via the your computer. It is ideal product for corrosive liquids, chemical or process tank level measure.
-
LZB Serial Ultrasonic Level Meter Bluetooth
LZB series 2-wire Bluetooth type ultrasonic level sensor is a general purpose product that replaces float, conductance and pressure sensors that fail due to contact with dirty, sticky and scaling liquids in small, medium and large capacity tanks. The sensor can be powered by a 24VDC external power source and power supply waterproof cable provided. The sensor provides continuous level measurement up to 3m with a 4–20mA signal output, Bluetooth digital output. Users can set parameters and read the data via the smart mobile phones. It is ideal product for corrosive liquids, chemical or process tank level measure.
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991