-
Ultrasonic Flowmeters for Permanent installation
Clamp-on ultrasonic flow meter is without process interruption, it is non-invasive flow measurement way of liquids. Its features is no pipeline disturbance and no pressure loss. And suitable for DN20 (3/4 inches) to DN5000 pipe . The liquid flow measurement can measure -35℃~200℃ liquids. Moreover...Read more -
What is the request of upstream and downstream flow for measured pipe ?
When the flow meter is installed, the liquid flows, the direction of liquid entry is upstream and the direction of liquid discharge is downstream . For measuring liquid flow by ultrasonic flowmeter, the straight pipe section is required as a certain length of the water inlet and outlet of flow me...Read more -
Lanry Ultrasonic flow meters
We supply liquid measurement ultrasonic flowmeters, it can be divided into clamp-on type, insertion type and pipe section inline type based on the installation methods . Clamp-on type ultrasonic flowmeter Clamp-on flow meter is easy to install, and no require processing interrupt . Insertion type...Read more -
Working principle and application field of ultrasonic level gauge and ultrasonic thickness gauge
The working principle of the ultrasonic level meter is that the ultrasonic transducer (probe) emits high-frequency pulse sound wave, which is reflected when it meets the surface of the measured object level (or liquid level), and the reflected echo is received by the transducer and converted into...Read more -
Ultrasonic water meter- working principle
The ultrasonic water meter is set to T1 and T2 are two ultrasonic sensors inserted into the pipeline respectively. The ultrasonic wave sent from T1 arrives at T2 at T1, and the ultrasonic wave sent from T2 arrives at T1 at T2 (as shown in the right figure). When the fluid is flowing, then the tw...Read more -
Development tend of ultrasonic flow meter
Multi-parameter measurement of flow sensor: Flow detection element or flow sensing element may feel other variables in addition to flow, and derive other functions from it. Second, from the mechanical flowmeter to electronic technology flowmeter innovation is one of the most important developme...Read more -
What is the blind area ( dead zone) of ultrasonic level meter/ level sensor/level transmitter ?
When ultrasonic level meter is transmitting ultrasonic pulse, liquid level meter can not detect the reflection echo at the same time. Because the transmitted ultrasonic pulse has a certain time distance, and the probe has residual vibration after transmitting the ultrasonic wave, the reflected e...Read more -
Ultrasonic water flow meter- Liquid measurement application
In common, our ultrasonic flowmeters can be divided into two parts: Doppler ultrasonic flow meter and Transit time ultrasonic flowmeter . Doppler flow meter can be applied to fluid flow measurement of open channel, raw sewage, slurry, liquids with lots of air bubbles,etc . Transit time flow meter...Read more -
TF1100 serial full of pipe clamp on ultrasonic flowmeter ( suiatble for below pipes and fluids )
Pipe material: include: (The materials must be equable, compact and can transmit ultrasound) Carbon steel, Stainless steel, Cast iron, Ductile iron, Copper, PVC, Aluminum, Asbestos, Fiberglass, Others Liner material: No liner, Tar Epoxy, Rubber, Mortar,Polypropylene, Polystryol, Polysty...Read more -
TF1100 non contact ultrasonic flow meter water liquid measurement— Window Descriptions
The TF1100 has a unique feature of windows processing for all operations. These windows are assigned as follows: 00～08 windows for the display of flow rate, velocity, positive total, negative total, net total, heat flow, date & time, meter run status etc. 11～29 windows for initial Parameter...Read more -
TF1100-EC clamp on ultrasonic flowmeter liquid — Transmitter power and output connections
1, Connect line power to the screw terminals AC, GND or DC in the transmitter. The ground terminal grounds the instrument, which is mandatory for safe operation. DC Power connection: The TF1100 can be operated from a 9-28 VDC source, as long as the source is capable of supplying a minimum of 3 Wa...Read more -
TF1100-EC wall mounted ultrasonic flowmeter clamp on flowmeter- Transmitter installation
After unpacking, it is recommended to save the shipping carton and packing materials in case the instrument is stored or re-shipped. Inspect the equipment and carton for damage. If there is evidence of shipping damage, notify the carrier immediately. The enclosure should be mounted in an area tha...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991