-
Ultrasonic Flowmeters in Pumping Stations
Ultrasonic flowmeters are widely used in pumping station systems for flow monitoring, energy efficiency management, equipment protection, and process optimization. Their non-intrusive measurement, wide range adaptability, and high precision make them particularly suitable for complex fluid enviro...Read more -
Ultrasonic Clamp-On Flowmeters in the Pharmaceutical Industry
Ultrasonic clamp-on flowmeters play a critical role in the pharmaceutical industry, leveraging their non-intrusive measurement, pipe-friendly installation, and high precision. Below is a detailed introduction to their application scenarios, core advantages, and key considerations, presented in a ...Read more -
In the water treatment industry, transit-time ultrasonic flowmeters have demonstrated strong appl...
In the raw water transportation phase, raw water is often sourced from natural water bodies such as rivers and lakes, with complex water quality that may contain impurities like sediment and aquatic plants. Transit-time ultrasonic flowmeters, free of mechanical moving parts, are immune to entangl...Read more -
What are the differences between two-wire ultrasonic level meters and three-wire ultrasonic level...
Two-wire Ultrasonic Level Meters Two-wire ultrasonic level meters adopt a design where the power supply (DC24V) and the signal output (DC4 – 20mA) share the same circuit. This configuration allows the device to operate with just two wires, making it a standard transmitter form. The major a...Read more -
Influence of Sensor Installation on Vertical Pipelines with Downward Flow Direction
When ultrasonic flowmeters are installed on vertical pipelines where water flows from top to bottom, the measurement accuracy may be significantly affected. This is primarily due to two factors: Incomplete Pipe Filling: Downward flow in vertical pipes often results in partial pipe filling, espe...Read more -
What problems are solved by multi-channel ultrasonic flowmeters compared with single-channel ultr...
The flow measurement principle of multi-channel ultrasonic flowmeters is basically the same as that of single-channel ultrasonic flowmeters. However, during flow measurement, multiple sensors are installed on the cross-section of the fluid flow. By accurately measuring the time difference of ultr...Read more -
What problems can be solved by the installation of hoop ? And what issues should be noted during ...
When installing an insertion-type sensor, it is necessary to weld a ball valve base onto the pipeline, install the ball valve, and then drill a hole before installing the insertion-type sensor. For pipelines that cannot be directly welded, such as those made of materials like cement, ductile iron...Read more -
In what situations is an electromagnetic flowmeter not suitable for use?
Electromagnetic flow meters are instruments that measure the flow of conductive liquids based on the principle of electromagnetic induction. They are generally not suitable for use in the following situations: Measuring non-conductive liquids: The working principle of electromagnetic flow meters...Read more -
Installation guide for clamp-on ultrasonic flowmeter sensors
1. Pre-Installation Preparations Select Suitable Installation Location Choose a straight pipe section with ≥10x pipe diameter of straight length upstream and ≥5x pipe diameter downstream. Avoid locations near pumps, valves, elbows, or tees. Ensure the pipe is fully filled with fluid and avoid in...Read more -
How should an electromagnetic flowmeter be installed?
The installation of an electromagnetic flowmeter needs to strictly follow the specifications to ensure the accuracy of measurement and long-term stability. The following are the key installation steps and precautions: 1. Selection of Installation Location Full Pipeline Condition Ensure that the...Read more -
How does an ultrasonic water meter connect to a platform?
There are usually several ways to connect an ultrasonic water meter to a platform as follows: Wired Connection: RS – 485 Interface Connection: This is a common wired connection method. The ultrasonic water meter is equipped with an RS – 485 interface. The RS – 485 interface of ...Read more -
Applications of Electromagnetic Flowmeters in the Middle East Region
The Middle East, a region renowned for its vast oil and gas reserves, rapidly growing industrial sectors, and increasing focus on sustainable water management, has witnessed a significant rise in the adoption of electromagnetic flowmeters. These sophisticated devices pla...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991