-
what is the shortcoming of clamp on ultrasonic flowmeter?
The current shortcomings of the ultrasonic flowmeter are mainly that the temperature range of the measured flow body is limited by the temperature resistance of the ultrasonic energy exchange aluminum and the coupling material between the transducer and the pipeline, and the original data of the ...Read more -
Non contact flow meter
Non-contact flow meter for measuring difficult-to-reach and unobservable fluids and large pipe flows. It is linked with the water level gauge to measure the flow of open water flow. The use of ultrasonic flow ratio does not need to install measuring elements in the fluid, so it does not change th...Read more -
what are the similarities and differences between ultrasonic flowmeter and ultrasonic heat meter?
Ultrasonic flowmeter: Ultrasonic flowmeter is an instrument that uses ultrasonic technology to measure fluid flow. It calculates the velocity and flow of a fluid by emitting ultrasonic pulses and measuring their travel time. Ultrasonic flowmeters are usually composed of a transmitter and a receiv...Read more -
Installation tips of clamp on ultrasonic flowmeter
1, the pipeline lining and scale layer at the installation of the sensor crunch of the ultrasonic flowmeter can not be too thick. There should be no gap between lining, rust layer and pipe wall. For heavily rusted pipes? The pipe wall can be jolted with a hand hammer to shake off the rust layer o...Read more -
The difference and key points of selection between inserted ultrasonic flowmeter and inline ultrasonic flowmeter
1. Introduction Ultrasonic flowmeter is a kind of instrument that uses ultrasonic wave to measure fluid flow. It has the advantages of non-contact measurement, high precision, wide measuring range, and can be applied to a variety of fluids, so it is widely used in petrochemical, water treatment, ...Read more -
Does pipe scaling affect ultrasonic flowmeters?
1. The work principle of ultrasonic flowmeter Ultrasonic flowmeter is a commonly used industrial flow measurement equipment, using ultrasonic sensors to measure the speed difference in the liquid to calculate the flow. The principle is very simple: when the ultrasonic wave propagates in the liqui...Read more -
What are the pipe requirements for clamp on ultrasonic flow sensors/ultrasonic flowmeters?
Clamp on ultrasonic flow sensors/ultrasonic flowmeters are suitable for most flexible plastic pipelines on the market. The most important factor to consider when selecting a sensor is the pipe outside diameter (OD). For flexible lines, the sensor/flow meter typically applies in the outer diameter...Read more -
How can non invasive ultrasonic flowmeter be used in the biopharmaceutical field?
Non contact ultrasonic flow meters use ultrasonic technology to measure flow at key points in various biopharmaceutical processes. Ultrasonic technology enables non-contact flow detection and is suitable for different liquids (color, viscosity, turbidity, conductivity, temperature, etc.). Ultraso...Read more -
Application of fixed or wall mounted ultrasonic flowmeter
Application of fixed or wall mounted ultrasonic flowmeter 1. Petrochemical industry In the petrochemical production process, the flow measurement of raw materials, intermediates and products is very important for production safety and cost control. The fixed ultrasonic flowmeter can accurately me...Read more -
Smart water utilities- ultrasonic water meter- data collection of water usage
We supply wireless remote ultrasonic water meters in line with the current smart water requirements, provide front-end measurement support for the construction of smart water, so that remote monitoring of water supply pipeline flow and pipeline pressure detection can be easily realized. ● Calib...Read more -
What are the disadvantages of ultrasonic water meters?
Ultrasonic water meter is also a kind of ultrasonic flow meter, and the accuracy is higher than other smart water meters. It has been used in industrial fields, chemical fields and farmland irrigation for many times, and has excellent small flow detection ability, which can solve many problems of...Read more -
Straight pipe requirement for electromagnetic flowmeter
Requirements for front and rear straight pipe sections 1. Requirements for the front straight pipe section (1) At the inlet of the electromagnetic flowmeter, it must be ensured that there is a straight pipe section, and the length should be at least 10 times the diameter of the pipe. (2) In the f...Read more
Ultrasonic Flow Meters
20+ Years Manufacturing Experience
- info@lanry-instruments.com
- +86 21-67618991